Hazard List for Aviation Technicians

AMTs should learn about risk management early in training. Instructors tasked with integrating risk management into instruction can turn to hazard assessments that identify the safety risks associated with the facility being used, the tools used in the procedure, and/or the job being performed.

The process for identifying hazards can be accomplished through the use of checklists, lessons learned, compliance inspections/audits, accidents/near misses, regulatory developments, and brainstorming sessions. For example, aviation accident reports from the National Transportation Safety Board (NTSB) can be used to generate discussions pertaining to faulty maintenance that led to aircraft accidents. All available sources should be used for identifying, characterizing, and controlling safety risks.

The 3P model can also be adapted for use in a nonflight environment, such as a maintenance facility. For example, the AMT perceives a hazard, processes its impact on shop or personnel safety, and then performs by implementing the best course of action to mitigate the perceived risk.

RELATED POSTS

• Risk Management and Single-Pilot Resource Management
• Defining Risk Management
• Three-P Model for Pilots
• Pilot Self-Assessment
• Situational Awareness
• Single-Pilot Resource Management (SRM)
• Aeronautical Decision-Making
• Assessing SRM Skills